Bluetooth RS232 Serial Adaptor: FB100AS ¡¡
	¡¡	1) Bluetooth RS232 Serial Adaptor 2) Bluetooth Bridge to extend the range.
Ordering No.: FB100AS  Enabling 1:7 Multi-serial Bluetooth Communications  Bluetooth Bridge Function (replacing FB900AS bridge)
FB100AS is Class 1 Bluetooth RS232 Serial Adaptor with Dipole Antenna and DIP switch for easier set-up and configuration for industrial users.  BM1001 has Serial Port Profile for wireless serial communication (Full cable replacement) and support full AT commands. BM1001 is already finished Bluetooth SIG/TELEC/FCC/CE approvals for international users, and finished RoHS. USB power cable is provided to get the power from USB port from nearby PC. Users may buy optional power adaptor or may get power from pin 9. With optional patch antenna (8.5dBi), range can be extended to 1Km. For onsite technical users, DIP switch on the back side of FB100AS will help to configure the baud rate in a second.

¡¡

Bluetooth Specification  V2.0  Profile  GAP, SPP  Carrier Frequency  2.4GHz ISM Band  Receiving Signal Range  -83dBm (Typical)  Transmission Power  +11dBm (Typical)  Power Consumption  Max 100mA  Supply Voltage  4 ~ 12V  Power Class  Class1 (100m)  Size  66 x 33mm  Data Rate  2,400 ~ 230,400 bps  Operation Temperature  -30¡É ~ 80¡É  Antenna Type  Dipole Antenna 4dBi(default)  Output Interface  9 Pin D-SUB Connector (Female type) > DIP s/w on the back side

Ordering P/N: FB100AS

¡á Appearance

¡á Pin Description

Pin No. Name of Signal Feature I/O Direction 1 DCD 1:1 - Data Carrier Detect Output CONNECT_CHECK 1:N - Connect Check 2 TX Transmit Data Output 3 RX Receive Data Input 4 DSR 1:1 - Data Set Ready Input STREAM_CONTROL 1:N - Stream Control 5 GND Ground - 6 DTR 1:1 - Data Terminal eady Output STREAM_STATUS 1:N - Stream Status 7 CTS 1:1 - Clear To Send Input MESSAGE_CONTROL 1:N - Message Control 8 RTS 1:1 - Ready To Send Output MESSAGE_STATUS 1:N - Message Status 9 VCC DC 5V Input

¡á Pin Connection

- With Flow Control

¡¡

- Without Flow Control

¡¡

- 1 : N Communication

¡á Feature of Dipswitch

¡¡

Switch 1 - Function Select

#1 : Selectable Power Supply

#2 : None

#3 : Role (Master / Slave)

#4 : Environment Setting

Switch 2 - Baud rate Select

Using Pin#2,3,4, it is possible to set Baudrate 2400bps to 230400bps

¡á Basic Component (1 pair)

¡¡ FB100AS 2EA Dipole Antenna (4 dBi) 2EA USB Cable 2EA CD 1EA

* Users may purchase 1ea only.