FB755AS/AC

 

¡á Feature

¡¡ ¡¡ 1:7 Multi-serial Embedded module ¡¡ 1. Profile : GAP, SPP 2. Specification : 2.0 3. Power Class : Class1 (100m) 4. Size : 27.7 x 20.6 mm 5. Interface : UART (TTL) 6. Input power : 3.3VDC +/-0.2V ¡¡ ¡¡ ¡¡ * Piconets(point to multipoint) are configurable up to (Max 1:7)

FB755AS User Guide version 1.0  Detailed Description on PC Configuration version 1.0  AT Command with Detailed Description and Usage version 1.0  1:N Data Transmit / Receive version 1.0

¢¸ Prev ¡ã Top

¡á Specification

¡¡  Specification  2.0  Profile  GAP, SPP  Carrier Frequency  2.4GHz ISM Band  Receiving Signal Range  -83dBm (Typical)  Transmission Power  16dBm (Typical)  Power Consumption  Max 100mA  Supply voltage  3.3VDC +/-0.2  Power Class  Class1 (100m)  Size  27.7 x 20.6 mm  Data Rate  2,400 ~ 230,400 bps  Operation Temperature  -20¡É ~ 70¡É  Antenna Type  Dipole Antenna  Output Interface  UART (TTL level)

¢¸ Prev ¡ã Top

¡á Pin Description

Pin NO. Name of Signal Feature Signal Level Input Output Direction 1 STATUS  STATUS LED TTL Output 2 FA SET  Factory Reset TTL Input 3 STREAM CONTROL ¡¡  1:N - Stream Control TTL Input DSR  1:1 - Data Set Ready 4 STREAM STATUS ¡¡  1:N - Stream Status TTL Output DTR  1:1 - Data Terminal Ready 5 CONFIG SELECT  PC Configuration Select TTL Input 6 CONNECT CHECK  1:N - Connect Check TTL Output DCD  1:1 - Data Carrier Detect 7 GND  Ground ¡¡ ¡¡ 8 TXD  Transfer Data TTL Output 9 RXD  Received Data TTL Input 10 MESSAGE CONTROL  1:N - Message Control TTL Input CTS  1:1 - Clear To Send 11 MESSAGE STATUS ¡¡  1:N - Message Status TTL Output RTS  1:1 - Ready To Send 12 VCC  3.3V DC ¡¡ Input

¢¸ Prev ¡ã Top

¡á Pin Connection

- With Flow Control

¡¡

- Without Flow Control

¡¡

- 1:N Communication

¢¸ Prev ¡ã Top

¡á Interface Board

The Interface Board below is necessary when testing the FB755AX from the PC.

¡¡

More Information <-- cllck to here

¢¸ Prev ¡ã Top

¡á Application

¡¡

---

 

¡¡

¡¡