News & Events

Products

Support

About Us

How To Buy

To Have Distributorship

¡¡

¡¡
 Bluetooth Serial Adaptor
 BTWIN
  : FB-Embed (M)
  : FB-Embed (S)
  : FB-Adaptor (U)  
  : FB-Adaptor (R)
  : FB-Bridge
  : FB-Accessories
¡¡
 2.4GHz Zigbee Module
  : ZB-Embed (S)
  : EZBee™ Module
 

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡


¡¡

2.4GHz Zigbee Module >> Zigbee Serial module


  EZBee: 2.4GHz Zigbee Serial Module
 

Part no.

Description

Version

Release Date

EZB-001

2.4GHz Zigbee Module
Short Range

VER.C.0.9.1
VER.R.0.9.0
VER.E.0.9.0

Sept 26, 2005

EZB-001EK

EZB-001 Evaluation Kit

VER.C.0.9.1
VER.R.0.9.0

Sept 26, 2005

EZBee™ is a compact Zigbee single-board module which is compliant to the 2.45GHz Zigbee specification v1.0 of IEEE 802.15.4. With EZBee™, users may enable Zigbee wireless network easily without a professional knowledge on Zigbee protocol. EZBee™ is designed to be used as a serial RF module to a Host system.

<Fig. 1.1: EZBee™- EZB-001>

Using AT commands provided, users may communicate with EZBee™. Full AT commands available can be found in the user manual.

EZBee™ can be operated as coordinator, router and end-device. Coordinators and routers are FFD (Full functional Device), so can be communicated peer-to-peer without beacon. But End-device module is RFD (Reduced Functional Device), so can be working only with Coordinator and routers and can be configured to work as low power mode.

¡¡



Key Features
 IEEE 802.15.4 compliant PHY and MAC
 Full Function Device (FFD)
 16 x 33.5 x 3.3 mm compact shield module for SMD mounting
 128KB Flash memory, 4KB SRAM, 4KB EEPROM
 UART, SPI and JTAG interface
 16 Channels in the 2.45GHz ISM band
 Up to 250kbps
 Integrated chip antenna or External Antenna options
 2.7 ~ 3.6V supply voltage
 -30C to 85C operating temperature
 Conforms with ETSI EN 300 440 (Europe), FCC CFR-47 part 15.247
     and 15.249 (USA), ARIB STD-T66 (Japan)

Applications
 Wireless remote control
 Building automation
 Personal area network
 Industrial control
 OEM equipment
 PC peripherals


 
Specifications
¡¡

Parameters

EZB-001

Performance

Range (LOS)

30m

Output Power

-25dBm~0dBm (1mW)

Data Rate

250Kbps

Receiver Sensitivity (PER=1%)

-94dBm

Power Requirements

Supply Voltage

2.7~3.6V

Tx Current (typical)

27mA

Rx Current (typical)

30mA

Power-down current

< 10uA

General

Operating Frequency

2.4~2.4835GHz

Dimensions

16 x 33.5 x 3.3 mm

Operating Temp.

-30¡ÆC ~ 85¡ÆC

Antenna Options

Integrated / External

Networking

Supported Network Topologies

Point-to-point, Point-to-multipoint, Mesh

Channels

16

Certifications

FCC/CE

Pending




Copyright ¨Ï 2005~2007 WIDECAST, Inc.  All rights reserved.